Corpusfishing.com

[Snapperslapper]

If any one is interested in my t top its off the boat and in the bluff for sale. 3146 Laguna Shores, call if you want to look at it more than just from the road. $400 cash

Matt 946-5200

[Snapperslapper]

The inside dementions are 35" X 46" at the feet. The top is approx 5' x 6'.

[robul]

im possibly interested but I wont be able to look at it im stuck at work every day during day light hours.. Does it mount to the deck or console? if from the deck how tall from the deck to the actual canvas? Im 6'6" tall I need to be able to fit under it.. also snap some photos if you can you can email them to robul at aol dot com thanks

[Snapperslapper]

mounts to the floor with bracing to the console and leaning post. Im 6 ft and can walk under with no problem. The top is low density starboard, not canvas

[SaltyCuda]

is that 35 wide by 46 front to back? or vise versa

Never seen one braced to the leaning post? did you mean the grab rail around the windshield?

Can we get some pics?

[Snapperslapper]

The legs are a rectagular pattern at the feet. The distance between the inside of the legs across the beam of the boat would be 35". The inside of the legs from bow to stern would be 46". The feet bolt to the floor and then brackets were made to bolt to the console and the leg of the top about 2ft from the floor. The leaning post that was in the boat was bolted to the back legs of the top in a simular manner. This system makes the top very sturdy and keeps the flexing down to a min. This top has never cracked or had to be rewelded. Ill see if i have some pics.

[Chef Lefty]

Is this still available? Does it have any storage underneath the cover?
_________________

[Snapperslapper]

Yea i still have it. No storage but there are pleanty of possablitys to add on.